With a range of styles and designs, ceramic tiles could give a distinctive look to the interior of your house. However, how exactly are they created?
Dust pressing is the most popular fabrication method, and massive hydraulic machines are utilized to press powdered materials. The tile has an untreated strength, and warpage decreases as it drys. The pressed tile can also be decorated using engobes prior to firing.
Manufacturing Process
In a moving video created by Ceramic District, we see the natural raw materials used in tile production being picked up by excavators, then poured into huge hoppers. The resulting clay minerals and other additives are blended, crushed and mixed into a powdered state ready for the next stage. These materials are now in a position to be mixed with mineral additives, thanks to the research and development. This decreases the amount of energy required for the process of firing.
The material is then measured and dosed before being wet milled to guarantee complete homogenization. Wet or dry grinding can be accomplished using a variety of milling machines, like ball mills or mills. The materials are reduced down to the size that is able to be pressed.
When the powdered mixture is created, it’s made into a ball to eliminate any air left and make a firm, even consistency. This is crucial to create tiles with an even, smooth surface that is resistant to scratches and stains.
The most commonly used method for fabrication is dust pressing, in which huge hydraulic presses press dry tile powder into tiles that could be as big as one meter square. This prevents shrinkage when drying, so the finished product will be perfectly flat and true. Glazes and engobes are applied to these tiles before their final firing.
Glazed Tile Production
Clay minerals constitute the primary raw ingredient used in the creation of ceramic tiles that are glazed. Other natural mineral additives like feldspar, for decreasing the temperature of firing may also be used (Ceramic Research Company). The main component of clay is a hydrous aluminum silicate which possesses a plastic quality that allows it to be formed and molded into any desired shape. The secondary raw materials are glaze and pigments which allow for the tile’s color, pattern, and design.
The manufacturing of glazed tiles starts with the initial grinding of the raw materials which is accomplished by either an muller or a roller mill that makes use of a squeezing motion between steel plates or a rotative motion between steel cones respectively to reduce larger lumps to smaller particles. The raw materials undergo an air drying process in order to remove any remaining moisture.
The next step, after the body slip is dried, is to place the glaze to the tile’s surface. Glaze is a liquid mix of frit, a glass derivative and colored dyes. The glaze is fused onto the tile’s surface by the high temperature kiln.
To make sure that the glazed tile is uniform and of the highest quality, it must undergo several additional processes. The tile needs to be polished to achieve a beautiful sheen. It must also be meticulously checked for imperfections prior to packaging.
Roller Kiln Tile Firing
Ceramic tile is made from clay that is formed by firing, then gach lat nen 100×100 glazed, and then fired. While various methods, raw materials, and manufacturing processes create different kinds of tiles, they all share one common characteristic that is the porosity (water absorption) of their unglazed backs.
After a dust-pressing and a pre-firing process in large hydraulic presses, huge volumes of tiles are loaded in huge roller kilns. These kilns for rollers have revolutionized the process of firing and stopping warping due to shrinkage. In reality, it was the kiln technology that enabled tile to make the leap from wall tiles only to flooring and walls in homes, commercial buildings, hotels and other areas.
The tile goes through an extreme temperature treatment in the kiln. If the tile is to be glazed, it is put through a glaze phase (step 4). This involves putting an extremely thin layer of liquid glaze to the tiles before drying them again under extreme temperatures in an atmosphere that is controlled.
The kilns are heated by natural gas, oil or electricity. Based on the fuel used, the temperature in the kiln could reach as high as 2,500 degrees Fahrenheit. The manufacturer may use conveyor belts for moving the tiles in the kiln, which helps to maintain its shape tile while it is being heated.
Clay Preparation To Tiles
Step 1 starts with mining clay minerals and transforming them into sand. The sand is later incorporated with natural minerals such as feldspar, which helps lower the firing temperatures and chemical additives to form. The resulting mixture is then crushed or ground to create smaller lumps. The muller, or hammermills to do this. Crushing is a challenging and dirty job as it requires steel hammers that can damage or even ruin the clay used in terra cotta.
When the clay has the proper texture to make tiles, it’s time to move on to the next steps in ceramic tile making. First, technicians must design and sketch out the design of the product. Drawings and templates help aid in making the process easier, particularly when making large-scale tiles for your decorative and home decor.
To remove air bubbles, the clay slabs must be wedged and shaped into the dimensions you want. The tiles should be dried between drywall sheets once they are shaped to avoid warpage. This is by far the most difficult part of the fabrication process. The technicians are constantly fighting against pinholes. A tiny hole can destroy an entire production run. It is essential to keep the tiles flat throughout the drying process as well as when the kiln is fired.
Once the tiles are prepared, they can be coated with glaze. The glaze can either be sprinkled on or poured over the tiles. Glaze can be made with glass derivatives or colored dyes. The final stage of the process of making ceramic tiles is to fire the tiles. The kiln gets heated to around 2000 degrees Fahrenheit.